Home > Knowledge > Content
Telescopic design and structural requirements for telescopic hot sticks
- Dec 20, 2018 -

The telescopic hot stick mainly acts on insulating tools for operating the charged equipment in a short time, such as turning on or off the high-voltage isolating switch, dropping the fuse, and the like. The interface type insulated operating rod of the telescopic hot stick is a commonly used insulating rod. The screw joint is used at the section, and the longest can be 10 meters. It can be conveniently carried in divided sections.

The telescopic high-pressure flexible rod of the telescopic hot stick has a 3-section telescopic design, generally up to 6 meters, light weight, small size, easy to carry, easy to use, and can be flexibly positioned to any length according to the use space, effectively overcoming The interface type gram bar has the disadvantage of being inconvenient to use due to the fixed length.

The telescopic hot stick is made of high-quality glass fiber cloth, epoxy resin, 306 resin phthalic anhydride, FRP fiber cloth and curing agent, etc., after the first high temperature and then first set on the mold. Then remove the mold, after a second high temperature grinding, a rough grinding, two fine grinding, and then lacquered into other FRP products, beautiful appearance, light structure, easy operation, excellent mechanical and electrical properties, suitable for each Used under high pressure conditions, the insulation performance is good and safe to use.


Related Products