Home > Knowledge > Content
How to correctly use high voltage electroscope for electroscope
- Sep 10, 2018 -

First of all, we actually need to understand that for high-voltage electroscopes, it is also a tool for checking whether high-voltage lines and power equipment are charged. In summary, we will actually notice it. In fact, it is also a safer tool used by substations. In fact, high-voltage electroscopes can check the line or whether the equipment is belted.


The purpose of the high-voltage electroscope for electroscope inspection is to protect the personal safety to a large extent. It is precisely because of this that we should pay attention to the correct use of high-voltage electroscopes.


First of all, for the high-voltage electroscope that is put into use, it must be an electroscope that has passed the electrical test. In the case of high-voltage electroscope, it is necessary to pay attention to the fact that it should be tested regularly to ensure it. Good performance. Then, when we use high-voltage electroscopes, the actual amount is to pay attention to wearing high-voltage insulated gloves and their insulated shoes. In addition, in other respects, in fact, there must be someone to monitor.


Before using high-voltage electroscopes, we actually need to pay attention to whether we should first check whether the electrical appliances are good or effective. If we talk about it, we should actually check whether the alarm is on the live equipment with the appropriate voltage level. Correctly, in this respect, in fact, it is necessary to perform power inspection on equipment that needs to be grounded. In fact, we will prohibit the use of an electroscope that does not correspond to the voltage level for power inspection.


It is precisely because of this that in fact, it is possible to avoid a relatively wrong judgment when testing with a high-voltage electroscope. Next, we actually need to pay attention to the fact that the line should be inspected with high-voltage electroscopes on a phase-by-phase basis. When it comes to the circuit breakers used for contact or isolating switches or other inspection equipment, we are actually It should be checked separately on each side of the inlet and outlet lines.


Related Products