Home > Knowledge > Content
500KV grounding wire use maintenance and safety knowledge
- Nov 23, 2018 -

In order to ensure safety, 500KV grounding wire should be suspended at both ends of the working place to prevent the user from sending power and inductive power. When grounding the pile, it is necessary to dial the body to quickly clear the large current of the accident and ensure the quality of the grounding. At the same time, the grounding wire should be protected. The 500KV grounding wire should not be twisted during use.


When not in use, it is necessary to put the soft copper wire well, and pay attention to the fact that after the 500KV grounding wire is removed, it must not be dropped from the air or scattered anywhere. It should be transmitted by rope, pay attention to the cleaning work of the grounding wire. The new staff must pass the training, study and use of the grounding line before they can perform the grounding line operation or work. Remember to use the ground wire of the corresponding specification for different voltage levels.


On-site work shall not hang the 500KV grounding wire, nor change the location of the grounding wire without authorization. In short, the grounding wire has a double-sided nature, which has a safety effect. If it is used improperly, it will also have a destructive effect, so the grounding wire should be removed in time. With a grounding wire switch, it can damage electrical equipment and damage the stability of the power grid, which can lead to serious electrical accidents.http://www.wxaqyd.com/

Related Products